You are here: Pliers / Wrench / Fastener Riveting
High-Speed High-Force Automatic Rivet Gun for Hand Tools & Hardware · Assembly, Fasteners and Hinge Riveting
Hand-tool manufacturing demands high volume, consistent appearance and reliable joints. Pliers, wrenches, scissors, screwdrivers, garden tools, locks, hinges and hardware fasteners use rivets as pivots and assembly joints. Manual riveting is labor-intensive, with unstable cycle times and inconsistent finish quality. An high-force automatic rivet gun with high-speed feeding, rivet counting and consistent pull force raises assembly efficiency and appearance quality. Antec supplies high-speed high-force automatic rivet guns, auto-feed riveting guns and high-force rivet nut guns for hand-tool and hardware producers, with free on-site trials and sample testing.
Typical Workpieces and Selection
| Workpiece | Common fastener | Recommended model |
|---|---|---|
| Pliers, wrenches, scissors pivots | Ø3.0–4.0 rivets | High-speed high-force automatic rivet gun |
| Hinges, hardware fasteners | Ø2.4–3.2 rivets | Dual-gun / small-nosepiece model |
| Garden tools, locks | Rivets + M3–M5 rivet nuts | Rivet gun + high-force rivet nut gun |
| Metal fittings, tube joints | Ø4.0–4.8 rivets | Fixed / suspended model |
Hand-Tool Assembly Priorities
| Priority | Description | Antec approach |
|---|---|---|
| High cycle rate | High volume, repeated single motion | Auto-feed up to 80 rivets/min, one machine replaces 3 workers |
| Pivot tightness | Pliers joints must move smoothly | Stroke adjustment by rivet height, consistent force |
| Consistent finish | Plated and polished surfaces must not be marked | Flat-head tooling, mark-free nosepiece |
| Missed-rivet prevention | Fixed rivet count per part | Point counting and incomplete-cycle alarm |
Solution Highlights
For pivots such as pliers and wrenches, control rivet height and joint tightness with a stroke-adjustable high-speed automatic model, and confirm the first article before running. Use small-nosepiece dual-gun models for hinges and small hardware points, and add a high-force rivet nut gun where locks and fittings need threaded holes. Dedicated fixtures per workpiece family help hand-tool plants get the full benefit of the high cycle rate.
After adopting high-speed high-force automatic rivet guns and dedicated fixtures, pliers and wrench pivot assembly moved from multiple operators to fewer stations. Rivet tightness became more consistent, plated surfaces suffered fewer marks, and changeover between product families was reduced to a fixture and nosepiece change.
FAQ
Send pliers, wrenches or hinges with your rivets to our factory. We run samples on the matching model, measure rivet height, joint tightness and cycle time, and return video and data before you decide.
We use flat-head tooling and mark-free nosepieces, and can add a protective fixture for visible surfaces. The trial uses your finished parts so appearance can be checked directly.
Yes. Feed tracks, nosepieces and fixtures can be changed for different rivet sizes and workpiece families. We recommend a quick-change fixture set to keep changeover short.
Related: High-Force Automatic Rivet Gun · High-Force Rivet Nut Gun · Furniture & Kitchen Hardware · Bicycles & E-Bikes
Hand-tool customers: send samples and book a trial
Send your rivets and representative workpieces. We can run a factory trial, test your samples, or arrange an on-site trial.
Service Process
- 1 Process reviewMaterial, rivet size, joint tightness and finish requirements
- 2 Sample / factory trialSend samples to our factory or book an on-site trial
- 3 Station trialMeasure rivet height, joint tightness, cycle time and yield
- 4 Line integrationBench, suspension or inline installation with operator training
- 5 Spare partsComplete nosepiece kit, 1-year warranty and fast parts supply
